Teaching Power Tool Safety To Children

Teaching power tool safety to children is a critical step of parenthood. Even if your son or daughter shows no interest in heavy-duty woodworking, metalworking, or construction, they will still need to learn how to protect themselves while other people are using power tools. Fortunately the method for teaching safety is simple. Use the five steps below, and you and your child will both share a fine memory.

The first step in teaching power tool safety to children is to practice what you preach. If you say wearing eye protection is important but you don't wear safety goggles yourself, you are sending a powerful-and dangerous-message to your child. Both of you should put on your eye protection, ear protection, and closed-toe shoes. Both of you should roll up your sleeves, keep clothing tight to your bodies, and tie back long hair. Lead by example, and follow the rules you set for your child.

Your second goal should be to make sure power tools are age appropriate. The best method is to start teaching safety through hand tools, such as a small handsaw, and then work your way up to more complex power tools once your son or daughter feels comfortable. This approach can also be more educational, since explaining the mechanics of a slow-moving, controllable Phillips screwdriver can be a lot easier than teaching the science behind a whirling cordless screwdriver.

Third, clear the workshop and focus your child's attention. Make sure that you both have enough room to work without tripping on cords, knocking down tools, or bumping into each other. Clear an adequate amount of space, and then double-check that there are no remaining distractions or interruptions. Your little student should not be distracted by dogs barking, siblings fighting, phone calls, iPod music, or anything else that could suddenly grab his attention and risk cuts, bruises, or worse.

Now you are ready to teach the basics of power tool safety. Show how tools should be held when they are in use, carried or put down when they are not, and turned off and stored when the job is done. Let children pick up the tools-powered off and unplugged-and investigate them before the initial trial. Just like with scissors, explain why running with power tools is not a good idea. Demonstrate how to control each power tool and possibly what can happen when the tool gets out of control-without hurting yourself! Remember that children's hands are smaller, so they may need the help of a vise or clamps to stabilize materials while they hold the power tool with both hands.

Finally, start the session slowly and begin with low-powered, "safer" tools. Be ready to help your child and take over if necessary. To make this first experience more fun, you may want to take your son or daughter to a kids' power tool class offered by one of the major home improvement chains. Working alongside other children may minimize your child's fears and your own. Even after teaching power tool safety to children, always supervise their actions. Make the introduction both safe and fun, and you will certainly work together on many more projects.

Marley Martinerin is a regular contributor to a number of sites and writes articles about such topics as band saws, and corded power drills.

Power Tools - A Handyman's Guide

Power tools can make any building project or home repair much easier and save a lot of time. If you are a do-it-yourself advocate or just enjoy projects around the house, investing in some good power tools is a wise decision. With so many tools on the market, there are a few that should be in your collection.

Circular Saws:

These saws are used primarily for cutting wood, but they can be used for cutting other materials as well, such as metal, masonry and plastic. The saw consists of a metal disc with teeth that's held by a base. When the saw is powered, the disc or blade rotates at varying speeds to cut through the selected object or material. Circular saws can be hand- held or table- mounted, and left or right-handed, depending on the side of the blade where the motor sits and which hand the operator uses when holding a saw. The saw base can be adjusted to select the depth and angle of the cut.

Mitre Saws:

This saw is used to make quick, accurate crosscuts or angle cuts, used typically to cut

molding, frames, or wood pieces that need a mitered corner. Mitre saws are fairly small and portable, with blades from 8 to 12 inches long that can be adjusted to different degrees. Good quality saws have blade guards, which automatically retract when the saw is lowered to make a cut and re-cover the blade when the saw is raised. This feature makes this power tool very safe to use. The saw has an attached dust bag that collects the sawdust that builds while the saw is in use.

Angle Grinders:

This is a hand-held tool used for cutting, grinding and polishing and widely used in construction and in emergency rescues. They are common tools used in workshops, service garages and auto body repair shops. There are many different kinds of discs that are used depending on the material and the task: abrasive grinding discs, grinding stones, sanding discs, wheels and polishing pads. There is typically an adjustable guard and a side-handle for two-handed operation. Some angle grinders can also be used as sanders with a sanding disc.

Cordless Drills:

A drill is a tool that is fitted with a tool attachment used for drilling holes in various materials or fastening materials together. When powered, the attachment tool rotates at various speeds while pressed against a material, such as wood. Cordless drills are used in all types of construction, repairs, metalwork and woodworking jobs. These very efficient drills are usually lightweight, hand-held tools that are powered by batteries, either standard or rechargeable. This power tool is one of the most popular and useful tools that is essential to have around.

Screwfix is the UK's largest direct and online supplier of trade tools, accessories and hardware products. With over 30 years' experience in the industry, we dispatch tens of thousands of parcels every week for next day and weekend delivery to tradesmen, handymen and serious DIY enthusiasts all over the UK.

To view our range of power tools customers can visit the Screwfix website.

3 Things That Set Milwaukee Power Tools Apart From the Rest

When you buy tools, you likely have a very specific use in mind for them. You want to make sure that the tools you purchase will not only complete the jobs that you want them to. You want to make sure that the tools will feel right in your hands and will allow you to waste less time. Many people who enjoy using power tools have been discovering everything that Milwaukee have to offer them. The more you get to know about these well-crafted tools, the more you will want to buy one.

There are many different factors which you are likely to be impressed by with Milwaukee. It is important to make sure that you are choosing the tools that you want for the right reasons. While you will thoroughly enjoy the power and convenience of the tools, you will also likely be impressed by other factors. For one thing, the batteries are among the best in the business. There is also a revolutionary new Quick Change Arbor which makes changing bits a snap. Most importantly, you will be amazed at how affordable these powerful tools are. While there are many more reasons you are sure to love Milwaukee, these examples can provide you with a jumping off point to let you know how great they are.

Best Batteries in the Business

The batteries used by cordless do more than just provide you the ability to take your tools wherever you want to go with them. They also provide you with the ability to work in many different conditions. The Milwaukee have been designed to provide you with power and durability. They even offer batteries which offer 28 volts of power and higher. The casing is designed to withstand drops as well as the ability to withstand water should it ever come into contact with it. Milwaukee allow you to get even more done.

Quick Change Arbor

When you change out bits, it adds a lot of time to the work you are doing. Milwaukee offers a Quick Change Arbor which allows you to easily switch out bits without the fuss of having to lock them down. A simple twist and a push is all it takes to remove one bit and replace it with another. These fast changes offered from Milwaukee can help you to go through the different stages of projects in record time, allowing you to get even more done than you thought possible.

Affordable Quality

When you are making an investment into Milwaukee, you likely do not want to have to break the bank just to get the tools you want to have. The good news is there are many different tools which you can buy which are very affordable. These prices make some of the best made tools in the industry available to everyone. This is one of the qualities which many people tend to focus on even though it is not one of the more important aspects.

After looking into these three different qualities which set Milwaukee apart from the competition, you are likely ready to invest in one of your own. As soon as you buy one, you are likely to want to buy more. Get yours today and start enjoying everything that they have to offer you.

Buying tools is something very personal to you. Find out why you might want to consider purchasing Milwaukee power tools for your next project.

A Look At Power Tools

Power tools are becoming an integral part of industrial and household applications. The construction and manufacturing sectors use this tool to a larger extent. The main advantage with these tools is the efficiency and the job can be finished at a faster rate. The output obtained can be very accurate. The manpower used will be to a minimal extent and humans are expected to operate the machines and watch their way of functioning. Most of the industrial applications use corded version of these tools. Household applications will use the cordless version as they have greater mobility. With the recent innovations made in this field, air tools are also becoming overwhelmingly popular because of their efficient working. There are several leading manufacturers like Makita, Hitachi, and Bosch who offer quality instruments at competitive rates.

The selection of the right kind of tool is dependent on the application that you are going to work with. A very simplest form of the power tool can be used to put holes in the walls and to tighten the screw and bolt. Hammers, drivers, wrenches, drills and screwdrivers are some of the simplest tools used in the market. There are multi-purpose tools available that are used to carry out multiple tasks using the same tool. This will save you time and energy. The tools can be easily handled and one need not need prior experience to handle them. They work efficiently and give the desired results at a faster rate. Choosing a wrong power tool for the work will consume a lot of energy and waste your time.

Written by Mark Gibson, Mark is one of the partners at Power Tools Ltd, one of the largest Power Tools suppliers in the UK. Shop for Cordless Power Tools at our new online shop or call in and see us for expert advice.

Everything You Need to Know to Buy Makita Power Tools

When you work with tools all day long, you want the tools which will help you to do more of what you need to do. There are certain tools which are better than others in making sure that you will be able to get the job done. These tools have the ability to provide power so that you can get the job done even faster. At the top of the list of great tools are the one offered from Makita power tools. These great, lightweight tools offer you everything you need so that you can get the job done anywhere that you want to.

If you are looking to buy Makita, you should get to know the different things which help to separate them from the rest of the tools available. For one thing, these tools are designed to be used in a professional work setting. They are constantly redesigned so that you get the maximum power. You can also choose from just about any portable power tool that you can imagine. Makita really do offer you everything that you had ever hoped for in an outstanding power tool. The more you get to know about them, the more excited you will be about buying one for yourself.

Made for Professionals

Whenever you are looking for great, it does not matter whether you are working at home or on the job, you need a tool which can stand up to every project. Makita have been designed to work on even the toughest construction sites. They are designed to be durable, powerful and long lasting. The three speed motors provide you with the amount of control you need to go from working lightly to powering through the work that you need to do. These are great tools to work on the job site because even if they are dropped, they will still work because that is what they are designed for.

Redesigned to Give You More

As technology progresses, there are more things which can become available for the individual looking for power tools. Makita always make sure that they are on the cutting edge of technology. Every tool is given the latest technology in terms of the feel of the handle, batteries used and even the motor. The batteries utilize Lithium-Ion technology so that you can use lighter batteries with a longer charge life. The motors have also been redesigned to provide you with all of the power you need and more. The lightweight design of the Makita allows you to carry them anywhere without tiring.

Variety of Tools Available

Since you are likely not looking for just one tool, Makita offers a wide variety of tools to meet any demand. You will find that there is everything from drills to power saws to drivers and more. Those looking for something smaller can even find compact tools which will allow you to get even more done in smaller places. No matter what kind of power tool you are looking for, you are sure to find it in Makita power tools.

Considering all of this information should help you to make an easy decision about whether you want to purchase Makita power tools. You will surely find a great tool to help you get the job done.

When you are choosing power tools for your home or work, you want quality. Get to know the quality and power of Makita power tools

A Brief History of DeWalt Power Tools

From the time he was a child Raymond E DeWalt watched and learned from his father the intricacies of woodworking and complex construction. Upon leaving school as an adolescent, he continued to follow this path and earned his keep at mills and construction sites as jobs were available. The young DeWalt though, also learned from his father that a life in mill-work was difficult one, and in order to simplify his own life and to capitalize on both the physical and economical expenses of hard labor, he used the advantages of his youth and experience to continually refine and enhance the machines around him to meet the certain needs and specifications of different jobsites.

DeWalt's ingenuity and expertise in the field were largely and always evident and soon he was offered a position as the head of a major woodworking mill that manufactured nearly everything from the simple six-panel box to the modern, complex home. As fate would have it, DeWalt's mill had more work than it could handle and as the President of the company allowed no budget space for additional labor costs, DeWalt simply had to get more efficient production from the existing force. DeWalt was forced into a jam and emerged with the first working model of what we know today as the radial arm saw.

Designing a yoke which attached directly to a saw and motor, and mounting this mechanism to a standard arm, DeWalt's machine could be raised and lowered, could slide back and forth, and could tilt to any bevel; as a result, DeWalt generated the work of four men with this machine, he reduced production costs, and completely enhanced overall productivity in the process. By 1922, and as Superintendent of Seabrook Farms, DeWalt perfected his radial arm machine and forever altered the woodworking, crafting, and building industries.

Just two years later in 1924 DeWalt formed the DeWalt Products Company and purchased a plant and office building in Leola, Pennsylvania where he marketed the "Wonder-Worker," the electrical, universal woodworking machine he'd developed at Seabrook Farms. In 1929 Dewalt Products Company upgraded their facilities with a new and modern plant and office building in Lancaster, PA where after adding 40,000 square feet of manufacturing space, an 8,400 square foot showroom, and a 16,000 square foot warehouse, they still remain today. In 1947, DeWalt Products Company completely reorganized and reincorporated itself under DeWalt Inc. Later, only further augmenting their enterprise, DeWalt Inc. extended its operations to Canada and acquired the United States and Canadian patent rights to the Bennett Two-Way Panel Saw.

In the spirit of DeWalt's first radial arm saw, 1967 crashed another wave upon the shores of the tooling community as DeWalt introduced the bench grinder and soon followed this introduction with that of intense metal cutting machines for both ferrous and non-ferrous metals. In 1992, DeWalt introduced their first line of portable electric power tools and accessories especially designed for professional commercial and residential workers. In 1994, only two years later, DeWalt broke ground once more with the release of their new cordless power tool system which included over 30 extreme power tools. Among them, a 14.4V cordless drill/driver, which was, at the time, the most powerful cordless tool on the market, and the first ever drill/driver/hammerdrill combination tool. Allowing crafters to work with far greater productivity and to build with a high-performance power tool, the system took construction to a wholly new level.

By 2001 the DeWalt Inc. enterprise included over 200 electric power tools and over 800 accessories to enhance them. Today, after more than nine decades of innovation in the woodworking and power tool industries, DeWalt continues to propel the community to new heights. Accordingly, DeWalt remains one of the most trusted and high-performance brands in the industry.

For over seventy years M&M Tool has been the ultimate resource for power tool parts and power tool repair for favorite brands like Dewalt, Porter-Cable, and Delta. With thousands of Dewalt replacement parts on-hand, and through providing parts and service to all the woodworking products, machinery, and power tools they sell, M&M Tool is the utmost authority in Dewalt power tools, tool parts, and power tool repair.

Comparison of Corded and Cordless Power Tools

There are bountiful numbers of benefits in using cordless modern tools. The technology has improved a lot and paved way to a comfortable working atmosphere. Cordless modern tools come with self powered batteries which are completely dependent on the battery power. Continuous usage will exhaust the battery and you might soon find a replacement or charge it again to run it efficiently. The batteries can be expensive and these machines seem to be little bit heavy.

So what do you say about corded power tools? Is there any advantage in using it? Obviously! These machine tools offer more power and efficiency when compared with cordless tools. They depend on a constant and non-dwindling power source for their operation. There are several tools that come with unmatched experience for the diversified applications. They deliver the highest performance when it comes to heavy duty jobs. These equipments need not be stopped in the midway and works can be finished much earlier. People in construction sites prefer corded tools for this reason. These tools are less expensive and you will never have a chance to replace the expensive battery in it.

Corded modern tools offer better strength, durability and results with unmatched professional experience. However, corded modern tools do not waste your money on expensive batteries. Cordless tools are safe to use on most occasions whereas corded tools have a serious electrical hazard and can easily trip over. These tools have limited portability and experts recommend not using extension cords to be safe on the floor.

Written by Mark Gibson, Mark is one of the partners at Power Tools Ltd, one of the largest Power Tools suppliers in the UK. Shop for Cordless Power Tools at our new online shop or call in and see us for expert advice.