The Bosch CC2130 Clic-Change Quick Change bit system features true one-handed load and release and is up to 33 percent faster than competitive systems. The CC2130 is extremely accurate with a patent-pending mechanism that virtually eliminates looseness and wobble. Features: Quick change bit system for fast, one-handed load and release Change bits without re-chucking To load, simply push bit into chuck To release, pull forward on the collar and remove Fits all 3/8-inch and 1/2-inch drills What's In The Box: Quick-Change Chuck Adapter Five Hex Shank Drill Bits Sixteen Power Screwdriver Bits Magnetic Bit Holder 1/4-inch Socket Adapter 3/8-inch Socket Adapter 1/4-inch Magnetic Nutsetter 5/16-inch Magnetic Nutsetter Storage CasePrice: $49.02
Includes 2.5 Amp Multi-X Oscillating Tool - MX25EC-21, Japanese-Tooth Wood Saw Blade - OSC138F, Rigid Scraper Blade - OSC2RSC, Wood / Metal Saw Blade - OSC312F, RIFF Grout Blade - OSC312RF, Sanding Pad - SDP001, (15) Wood and Paint Sanding Sheets, Adapter - OSCAD1, Allen Wrench, Accessory Box, Carrying Case
Includes 2.5 Amp Multi-X Oscillating Tool - MX25EC-21, Japanese-Tooth Wood Saw Blade - OSC138F, Rigid Scraper Blade - OSC2RSC, Wood / Metal Saw Blade - OSC312F, RIFF Grout Blade - OSC312RF, Sanding Pad - SDP001, (15) Wood and Paint Sanding Sheets, Adapter - OSCAD1, Allen Wrench, Accessory Box, Carrying Case
Versatile, Flexible in Applications and Materials; No-Mar Plastic Nose; Screw to Tighten Accessories; Tool Holder with Variable Angle Adjustment; Ergonomic Design; Fuel Gauge; Variable Speed Dial; Includes: (1) Hard Carrying Case, (2) LitheonTM 12V Max Batteries - BAT411, (1) 30 Minute Charger - BC430, (1) Adapter, (1) Sanding Plate, (1) Sanding Paper Pad, (1) HCS Plunge Cut Blade (1-5/8x1-1/2), (3) HCS Plunge Cut Blade (3/8 x 1-1/4), (1) BIM Segment Blade (3-1/2 x 7/8)
SDS-Plus, 5/32" x 4" x 7", Shank Bit, Tapcon Hex, To Be Used For Setting Masonry Screws, 4" Useable Length & 7" Overall Length.
Charges all 14.4V and 18V litheon FatPack and SlimPack batteries. .
Includes 18V Cordless Lithium-Ion Compact Tough 1/2-in Drill/Driver - DDS180-02, (2) 18V Slim Pack Lithium-Ion 1.3 Ah Batteries, 30 Minute Li-Ion Charger, Carrying Case
We'd wager there have been plenty of times you tried to maneuver a drill/driver into a spot that just wouldn't allow it and wished you had a small, powerful tool that would drive a screw where others just can't go. Here it is. The PS10-2A is one of the handiest, most powerful little drivers we've laid hands on. It's impressively powered by "litheon," which Bosch calls "the industry's most advanced lithium-ion battery technology." We can attest that there's absolutely no lag in power, and the run time is great; more than 100 drives per charge. Recharge time is just 30 minutes, so you should never have to wait for a battery. The best feature, of course, is the clever design. Instead of a pistol grip like most drivers, this one has a sturdy tool body and an articulating head that has five detents, letting you set it however you need it. The head itself is just 3-1/2-inches long, so it's no struggle at all to slip it into tight spaces suchas in between studs, under-sink cabinets, between joists and other tricky situations. If it's length you need, just flip the head to the vertical position and it's literally like having a screwdriver at your fingertips; it's not quite a-foot long at its full length. It uses 1/4-inch hex bits, and they're easy to change. We would have liked to see some on-board bit storage, but that's a small point. The two-finger trigger is comfortable, and it's quite sensitive, so take care not to strip your fasteners while you're on the learning curve. In all, we're really pleased with this little driver, and we think there's a place for it in just about every toolbox. Includes: tool, (1) carrying case, (2) 12-volt batteries, (1) 30-minute charger, (2) 1.5-inch drive bits.
Take the back-ache out of setting up and breaking down your table saw with the revolutionary new Gravity-Rise wheeled saw stand from Bosch. Designed for general contractors, trim carpenters, woodworkers and remodelers, the Bosch TS2000 Gravity-Rise stand is a rugged, portable, and, best of all, easy-to-use. Setup is a snap! Simply turn the release lever, put your hand on the tabletop, and the stand raises and lowers relative to your hand pressure so that you can find just the right height for your tired back. Constructed of heavy gauge tubular steel, the Gravity-Rise stand is built to withstand the toughest jobsites. Eight-inch treaded pneumatic wheels easily handle rough terrain and make tool transport nearly effortless. The Gravity-Rise is equipped with Universal Mounting Slots, which are designed to accommodate most major manufacturers' portable table saws.
Bosch, 1 Major Appliance Or Shower At A Time, Hydro Ignition, LP Tankless Water Heater, Hydro Ignition Means No Standing Pilot Or Electricity Needed, Water Flow Spins The Hyrdro Igniter Which Generates The Millivolts Needed To Ignite The Gas To The Burners, 117,000 BTU Input Delivers 3.3 Gallons Per Minute At A 55 Degree Fahrenheit Rise, Standing Pilot, 1/2 Gallon Flow To Activate Burners, Vertical Venting Only, Must Use 5" Double Wall B Vent Pipe, Modulating Gas Valve From 28,000 To 117,000 BTU's For Optimal Performance, 1/2" Male Nominal Pipe Thread Gas And Water Connections, Natural Gas Pressure, Minimum 7" Water Column To Maximum 14" Water Column, Water Pressure Minimum 18 PSI To Maximum 150 PSI, 69% Energy Factor, 80% Thermal Efficiency, T & P Valve Included, Warranty 12 Years On Heat Exchanger & 2 Years On Parts, CSA Certified.